SSAW Welded Pipe

Uses:SAWH pipe are mainly used in water supply engineering, petrochemical industry, chemical industry, electric power industry, agricultural irrigation and urban construction,and is one of 20 developing key products of our country.

Size:OD: 219mm-4064mm, WT: 3.2-40mm, LENGTH: 3-70m

Grades:Q235A、 Q235B、 Q345、L245(B)、 1290 (X42) 、 1320 (X46) 、 1360 (X52) 、 L390(X56)、 L415(X60)、 L450(X65)、 L485(X70)、 L555(X80)、 1290M (X42M) 、 1360M (X52M) 、 1390M(X56M)、 IA15M(X60M)、 IA50M(X65M)、 IA85M(X70M)、L555M(X80M).

Standard:

API5L PSL1/PSL2 Gr.A,Gr.B,X42,X46,X52,X56,X60,X65,X70;

ASTM A53/A252/A500/ EN10219/EN10208/EN10297/JIS G3457

Coating Standard:

ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for ductile-iron Pipe and Fittings for water

DIN 30670 Polyethylene coatings of steel and fittings

Category:

Description

ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
API 5L Specification for Line Pipe(Two levels PSL 1 and PSL 2 of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.)
A252 Standard Specification for Welded and Seamless Steel Pipe Piles
A500 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
EN10219-1 Cold formed welded structural hollow sections of non-alloy and fine grain steels – part1: Technical delivert conditions
EN10219-2 Cold formed welded structural hollow sections of non-alloy and fine grain steels – part2: tolerances dimmsions and sectional properties

Chemical Analysis and Mechanical Properties

Standard Grade Chemical Composition(max)% Mechanical Properties(min)
C Si Mn P S Tensile Strength(Mpa) Yield Strength(Mpa)
API 5L PSL1 A 0.22 0.90 0.030 0.030 335 335
B 0.26 1.20 0.030 0.030 415 415
X42 0.26 1.30 0.030 0.030 415 415
X46 0.26 1.40 0.030 0.030 435 435
X52 0.26 1.40 0.030 0.030 460 460
X56 0.26 1.40 0.030 0.030 490 490
X60 0.26 1.40 0.030 0.030 520 520
X65 0.26 1.45 0.030 0.030 535 535
X70 0.26 1.65 0.030 0.030 570 570
API 5L PSL2 B 0.22 0.45 1.20 0.025 0.015 415 415
X42 0.22 0.45 1.30 0.025 0.015 415 415
X46 0.22 0.45 1.40 0.025 0.015 435 435
X52 0.22 0.45 1.40 0.025 0.015 460 460
X56 0.22 0.45 1.40 0.025 0.015 490 490
X60 0.12 0.45 1.60 0.025 0.015 520 520
X65 0.12 0.45 1.60 0.025 0.015 535 535
X70 0.12 0.45 1.70 0.025 0.015 570 570
X80 0.12 0.45 1.85 0.025 0.015 625 625
ASTM A53 A 0.25 0.10 0.95 0.050 0.045 330 330
B 0.30 0.10 1.20 0.050 0.045 415 415
ASTM A252 1 0.050 345 345
2 0.050 414 414
3 0.050 455 455
EN10217-1 P195TR1 0.13 0.35 0.70 0.025 0.020 320 320
P195TR2 0.13 0.35 0.70 0.025 0.020 320 320
P235TR1 0.16 0.35 1.20 0.025 0.020 360 360
P235TR2 0.16 0.35 1.20 0.025 0.020 360 360
P265TR1 0.20 0.40 1.40 0.025 0.020 410 410
P265TR2 0.20 0.40 1.40 0.025 0.020 410 410
EN10217-2 P195GH 0.13 0.35 0.70 0.025 0.020 320 320
P235GH 0.16 0.35 1.20 0.025 0.020 360 360
P265GH 0.20 0.40 1.40 0.025 0.020 410 410
EN10217-5 P235GH 0.16 0.35 1.20 0.025 0.020 360 360
P265GH 0.20 0.40 1.40 0.025 0.020 410 410
EN10219-1 S235JRH 0.17 1.40 0.040 0.040 360 360
S275JOH 0.20 1.50 0.035 0.035 410 410
S275J2H 0.20 1.50 0.030 0.030 410 410
S355JOH 0.22 0.55 1.60 0.035 0.035 470 470
S355J2H 0.22 0.55 1.60 0.030 0.030 470 470
S355K2H 0.22 0.55 1.60 0.030 0.030 470 470

Reviews

There are no reviews yet.

Be the first to review “SSAW Welded Pipe”

Your email address will not be published. Required fields are marked *